Fish Finder Mounting Ideas

Fish Finder Mounting Ideas

fish finder mounting ideas

Whether you’re planning to use your fish finder in a motorboat, a small paddle boat, or a kayak, you need to know where to mount it. Mounting it on the bow is ideal, but there are other options as well. Among these are Suction cup mounts, Swivel mounts, Stake mounts, and a transom mount. Regardless of the mounting style, these options will keep your electronics out of your way and out of the way.

Suction cup mounts

A suction cup mount can hold a fish finder in place without the need for a permanent mount. It is a popular option for boats that are not very tall, like kayaks. It also comes with a suction cup to keep the device steady on flat surfaces. These suction cup mounts can be removed for travel and storage if needed. However, they are not as sturdy as a suction cup phone holder.

There are several types of mounts available for fish finders, including gimbal, swivel, and clamping. Different types have different benefits. Suction cup mounts are easy to use and can be attached to nearly any surface. Suction cup mounts are the most convenient for mounting fish finders on flat surfaces, while gimbal and double socket arm mounts can be used for more secure mounting.

Swivel mounts

There are various types of fish finder mounts. Some are permanently fixed, like those made by Johnny Ray, while others are swivel-mounted, such as those made by Scotty. These mounts can be attached to any type of boat, from an inflatable kayak to a raft frame. Other types of mounts, like track mounts, can be used in small boats and kayaks.

Pedestal-mounted fish finders are perfect for small boats, and usually stand between one and four feet tall. They are usually sturdy, but you’ll need to provide ample flat space to mount your device. One underrated choice is the RAM gimbal mount. This mount can be installed next to your console, or on the front of your trolling motor. It’s also a great option if you don’t have a lot of room to mount a fish finder.

Stake mounts

If you want to secure your fish finder, there are many different ways you can do so. Suction cup mounts are the most common option, but there are also clamp mounts and stake mounts. Before you mount your fish finder, you must choose the location on which you’ll be using it. Suction cup mounts are easy to install and remove. They also feature friction and R-lock lockable joints.

Pedestal mounts are an excellent choice for small boats. They extend from the deck of your boat and are one to four feet tall. They are also popular for active imaging technology and intense watching. Although they are not permanent options, they should be removed during transport or transportation to prevent theft. Regardless of the choice you make, you should be able to use your fish finder properly to improve your chances of catching more fish.

Transom mount

You’ve probably heard about the transom mount for fish finder. Having it installed on your boat will make your trip much more enjoyable. But before you install it, you should know how to install it. Luckily, this can be a fairly straightforward process. All you have to do is follow a few simple steps. Here’s a step-by-step guide. To install it, simply follow these instructions.

To start, choose the best location for the transducer. The transducer should be mounted on the starboard side of the boat, as the propellers move downward. This side is ideal because it produces the least turbulence and offers the best performance. The position should be about 15 inches away from the propeller. Also, be sure to check the transducer’s mounting position in the fully trimmed position.

Transom mount saver block

Once you’ve decided to mount a fish finder on the transom, you’ll need to protect it from damage. You’ll need to use a marine sealant to fill in the mounting holes. This type of adhesive is designed for below-waterline applications. To avoid further damage, you should always clean the mounting plate with denatured alcohol or acetone. Then, you’ll need to secure the mounting plate to the transom using painters or masking tape.

A transom mount saver block can be installed on an aluminum boat’s transom. These blocks can be used to mount other marine electronics on the stern, including fuel separators and livewells. These blocks also prevent water infiltration from unnecessary holes in the transom. To install these blocks, you’ll need a transom that’s at least six inches wide.

Read our next article small kayak fish finder. We would love your feedback about our Kayaks