How to Attach Kayaks Side by Side on Your Roof

how to attach kayaks side by side

There are several different ways to secure your kayaks side by-by-side. Some of the most common are Stacker bars, J-cradles, and saddles. You can also use blocks with a V-shape or depression in the middle. In this article, we will discuss all of them. Hopefully, you’ll find the answer to your question. In the meantime, enjoy your kayaks!

Stacker bars

If you plan to attach kayaks side byside on your roof, you will need to invest in roof rack pads. These can be purchased from many different sources, but they all work the same way. Roof rack pads are made of thick, durable polyester fabric and will securely mount the kayaks. You can also add standup bars and a helper to your kayak carrier system. These kayak rack pads are also suitable for bare roofs.

Stacker bars for kayaks allow you to stack multiple kayaks on the side of a car. They take up half the crossbar space per kayak and provide maximum boat capacity. The bars can be used with touring and recreational kayaks alike. They are easy to install and secure. Stacker bars work with most kayak types and are a great way to transport multiple kayaks. Just make sure that you secure the kayaks to the bars with straps on all three.

Once you’ve secured your rack, you should make sure that your straps loop under the cross bars. Then, you should loop the end straps under the sides of each kayak. Make sure that they don’t slide through the straps. When you’re ready to take your kayaks on the road, you should double-check your kayaks’ straps and buckles to ensure that they’re securely attached.


Whether you’re looking to transport two or three kayaks, a J-cradle is a great way to secure them side by side. The soft mounting points on the J-cradle ensure that your kayaks are secure while still leaving you with more roof space for another carrier. In addition, J-cradles are versatile enough to accommodate a variety of kayak types, so you can be sure that your rack will work with your vehicle.

To attach the J-cradles to a crossbar on a car rack, start by securing the straps on the back of your kayak. The straps should go under the crossbar on the front of the car rack, and should loop under the edge of the kayak. Once secured, tighten the straps by pulling toward the kayak. You can now give your kayak a test ride to ensure that it’s securely strapped to the rack.

Next, load your kayak by placing its edge against your thighs. The stern should face outward, and the cockpit should be facing outwards. Be sure to bend your knees to prevent any possible injury. Lift one knee and slide the kayak onto your thighs. Once you’ve secured the cradles, place the kayak on top of them. Once loaded, tie the kayaks together with the cradles.

Stacker saddles

Stacker saddles are ideal for transporting two or more kayaks. They have padded bars that are shaped like the letter “J” and position the kayaks side by side. Stacker saddles also leave extra roof space for another carrier. A cradle allows for kayaks of varying lengths to be transported side by side. Stackers and J-racks are an excellent choice for vehicles that have limited space.

The Malone SeaWing is the best kayak saddle on the market. Malone is the number one brand of roof racks. The Malone SeaWing brackets look like bird wings and attach to the base rack. A kayak is then strapped to the cradle in a way that prevents it from moving around. The Malone SeaWing is ideal for carrying one kayak side by side and supports 70 lbs.

Stacker saddles allow you to load and unload your kayak in an easy, fast, and convenient manner. Unlike with conventional kayak racks, you no longer have to worry about putting the kayak on or off the roof rack. By simply installing these saddles on your roof rack, you can load and unload your kayak in no time at all. They also allow you to place your kayak on the rack right side up without worrying about accidentally tipping it.

Another great option is the Thule Dockgrip Kayak Saddle. This versatile rack is capable of securing two kayaks side by side. Using a saddle that adjusts to the right angle allows you to load and unload two kayaks without lifting the entire vehicle. When loaded, this rack has a height of about six feet. This is ideal for loading large fishing kayaks.

Tie-down straps

You can attach two kayaks side-by-side using tie-down straps or NRS cam straps. Both bow and stern lines should be tied off. The lines should not be too tight or too loose. If the kayaks are not secured tightly, the kayaks can thrust forward and fly through the windshield. Be sure to follow all directions and tie down the kayaks securely.

Before you tie-down your kayaks, make sure that the length is longer than the width of your kayaks. Using a long tie-down strap could result in the kayaks getting caught under the tire or the car top carrier. Be sure to tie down the end of the straps vertically to maximize leverage. Lastly, make sure the straps are secured properly.

Once you have the kayaks secured, you can tie them down to your roof rack. The straps should be long enough to secure both kayaks in place. You can use two straps to secure the kayaks side-by-side. Use the buckle-free end first, then loop the plain end through the buckle. Thread the other end through the buckle, but be sure not to squeeze the kayak. Repeat the process for the second strap.

After attaching the kayaks, make sure to check the lines and tie-down straps frequently. Double check connections every five to fifteen miles or so to make sure everything is secure. You may want to retighten the lines if they are not taut. You can also check the kayaks’ connections after every 25 miles until you arrive at your destination. A few hours of practice will go a long way.

Red flag

There are many options when hauling your kayaks. You can use a pickup truck with its tailgate up and lean the kayak against the cab. Trucks are the most common option for hauling multiple kayaks. Just be sure to secure the kayaks properly before loading them into the truck. And when you’re done hauling your kayaks, be sure to place a red flag to warn motorists of your presence.

A small pickup truck can fit two kayaks in its bed and is an ideal way to haul them. If the kayaks are more than four feet long, they’ll need two straps to secure them in place. Alternatively, you can use bed extenders to keep them supported behind the bed. But don’t forget to use a red flag to avoid overhang. Here are some more options to haul your kayaks safely.

If you’re transporting a large kayak, it may be easier to place the kayaks upside down. This will protect them from road debris and will improve aerodynamics. You can also transport large kayaks by setting the gate open and then placing them level. Be sure to attach the red flag on the stern and bow of the kayak. Finally, attach a third strap to the handle of the kayak.

read more saltwater fishing kayaks for sale blogs here.