How to Choose a Fish Finder Canoe

How to Choose a Fish Finder Canoe

fish finder canoe

Finding a good fish finder for your canoe should be as simple as picking out your favorite pair of sneakers. You can choose one with Dual Beam sonar and GPS functions. You should also consider its ease of use and installation. Below are a few of the things to look for when shopping for a fish finder. Read on to learn more. After reading this article, you should be well equipped to choose the right one for your needs.

Dual Beam sonar

The Dual Beam sonar on a fish finder canoe offers two concentric sonic beams in a single unit. This gives you a wider view of the water column and more detail than regular sonar. This unit also features a split screen, which allows you to view both the wide and narrow beams simultaneously. This can give you a better picture of the water column and can be very helpful when you’re hunting for fish.

The Dual Beam sonar operates at two frequencies, and each frequency produces a different angle of the beam cone. The beams of each frequency are 28 degrees wide and 16 degrees deep. The range and depth capabilities of the fish finder canoes are different depending on the frequency used. For example, a 200kHz frequency will provide a scan of 600 feet, whereas a 455kHz frequency will scan down to only 300 feet.

GPS functions

With the introduction of GPS technology to the fishing world, pre-season scouting has never been more rewarding. GPS technology enables anglers to set waypoints and network with a motor to keep position and navigate by waypoints. While GPS-enabled fish finders are still the most sophisticated models, affordable units are starting to come out on the market and bring the power of way pointing to the masses.

One of the most popular GPS-enabled fish finder canoes is the Garmin Helix, which features dual transducers for high-quality, ultra-detailed images. With two pre-programmed modes, the Humminbird Helix offers more clarity and detail than its predecessors. Its display is also adjustable to give a clear view of the fish swimming below, if desired. The device is also built with Bluechart G3 maps, which are constantly updated and can be used to identify structure. Moreover, the Striker Plus is compatible with kayaks and has a large clear screen.

Easy to install

Having an easy to install fish finder can make fishing easier for you. Many canoes and kayaks are already equipped with transducers and a battery, but if you are looking to add a fish finder to your canoe, you should know that there are two primary types. Mountable fish finders need to be installed in the deepest part of your hull, and portable ones can be easily tossed in your backpack and used on a rental boat.

The first one is the Garmin Striker 4 – a waterproof fish finder that displays depth, fish locations, structure, weeds, and rocks. The Striker 4 comes with a neck strap and works well for canoe fishing, but not for fast-moving boats. You should make sure that your boat is not going more than five miles per hour, or else you may have difficulty installing the device.

Easy to remove

Easy to remove fish finder canoe mount kits are perfect for kayak anglers. They make it easy to attach and remove the transducer with no messy adhesives and no drilling of fittings. Best of all, they are universal and will work with any kayak. Here are some of the benefits of easy to remove fish finder canoe mount kits. Let’s take a closer look. Read on to find out more.

Read our next article Fish finders for fishing kayaks. We would love your feedback about our Kayaks