If you want to keep your Delta kayak in good condition for years to come, here are some tips to clean it properly. Use a scratch remover or Novus cleaner to gently clean the surface of your craft. Next, use a kayak wax to add luster to the hull. And, of course, you should always protect your craft from the sun’s harmful UV rays. You’ll be glad you did.
Novus cleaners and scratch removers gently clean the surfaces of your delta kayak
Designed to gently clean your Delta kayak, Novus cleaners and scratch removers effectively eliminate surface scratches, fogging, and dust while leaving a lustrous shine. They also resist finger marking and eliminate static. Novus cleaners and scratch removers are free of harsh chemicals and abrasives, leaving a lustrous shine. The non-abrasive formula leaves no residue.
If you prefer a more gentle cleaning process, you can use a garden hose to loosen dirt and grime. Then, fill a bucket with clean water and add mild soap. Then, add the boat wash according to the directions on the bottle. Be sure to wash both sides of your kayak, and repeat the process if needed. Repeat the cleaning process if necessary if stubborn marks are still present.
Applying a kayak wax can boost the durability of the hull
Kayak wax is an excellent way to protect your hull from the elements and boost its durability. It adds an extra layer of protection, shielding the hull from the sun’s harmful rays. It also helps prevent scratches and dents. While kayak wax is not necessary for polyethylene or plastic vessels, it is an excellent way to enhance the appearance of the hull and increase its life span.
Before applying a kayak wax, rinse your kayak in clean water. Make sure to wipe off any soap residue. Dry it with a towel. Alternatively, if your kayak is made of plastic, skip the waxing process. You can also apply a UV protectant to polyethylene kayaks. Waxing your kayak may also improve your kayak’s speed. Waxing helps create a smoother surface for paddlers to increase their speed. However, this difference may not be noticeable.
After you apply the kayak wax, you should let it dry and polish it to make it look shiny. You can apply UV protector to it as well, which adds an extra layer of protection. After the wax has dried, you should wipe the kayak with a clean, dry cloth to remove the extra wax. Then, you can go out on the water and enjoy your new shiny kayak.
While kayaks don’t get as much exposure to UV radiation as a boat, it can still suffer the effects of rain, wind, and snow. This makes it imperative that kayaks be properly stored indoors. Even if your kayak is stored outdoors, make sure to keep it clean and dry. If you’re going to leave it out in the elements for long periods, you should use a marine-grade wax to protect the hull.
The first coat should be applied using a brush. This process requires one person, who should start at the keel line and work down to the sheer. Using a brush, tighten the cloth. Then, move back to the other side and repeat the process again. Repeat this process two to three times, changing sides every two to three feet. After the first coat, make sure to wipe the hull again with a damp rag to remove any excess dust.
Another area of the kayak that can be easily damaged by water is the skeg housing. Seal it with waterproof silicone or another type of sealant. Pay special attention to the ends. Wipe off any excess. The skeg housing is a particularly common location for leaks. By sealing it with a marine wax, you can increase its lifespan by several years. If your kayak is a little rough or needs a resealing job, it’s probably best to dry-dock it.
Protecting your craft from UV rays
Exposure to the sun can damage many types of artwork. UV rays interact with the color molecules in the artwork to produce a process known as photolysis. This degradation of color can occur over time. There are several ways to protect your art from damage. Listed below are some of the most effective options:
Avoid direct sunlight. The strongest UV radiation occurs during the morning and early afternoon. Keep your craft in a dark location or shade during these hours. Avoid using reflective surfaces like mirrors or glass – these materials reflect the light and intensify the UV intensity. If you must display your art outside, consider protecting it with a UV-blocking glass. Make sure to wipe your craft down after use to remove any excess UV protection.
read more saltwater fishing kayaks for sale blogs here.