How to Haul 2 Kayaks on a Nitro Cruiser

how to haul 2 kayaks on a nitro

There are two options to haul two kayaks on a nitro: using a trucker’s hitch and a plastic version of an Anderson bailer. If you’re looking for a low-tech solution, you can wrap a blanket around the bow and stern of the kayaks. Or, you can simply push the stern up and add a second rack. Whatever method you choose, make sure you double-check the straps before driving.

Double-check the security of your straps before driving

To ensure your nitro kayak is securely secured, make sure to check the kayak carrier’s straps and securement points periodically while driving. Every five to fifteen miles, stop to inspect the connection points and tightness of the straps and lines, then re-tighten as needed. Repeat this procedure every 25 miles or so until you reach your destination. This will ensure that you’re fully protected.

Make sure that your bow strap is attached to a secure area of the nitro kayak, and that the stern strap passes over a secure part of the vehicle. Avoid strapping the kayak to plastic components, as they will not be as secure and could damage the vehicle. For the hood strap, make sure it’s attached to a bolt under the hood of your vehicle, and make sure it’s securely in place.

Double-check the security of your nitro kayak straps by passing the loose end through the buckle. Then, use a lighter to cinch the straps. If you’re still not sure, get a friend or paddle partner to double-check the secure straps before driving. This will ensure that your kayak won’t move around when it’s being driven.

Make sure the kayak is securely attached to the carrier. If you’re not using the roof rack, the kayak could slide off and fall off the vehicle’s roof. Make sure you check the load every few minutes before driving your nitro kayak. If you’re not sure, you can buy an additional tie-down strap and anchor points for your kayak if needed. If you’re not comfortable with straps, you might have to get a kayak carrier that has tie-down points.

Using a paddle partner to haul 2 kayaks

Having a paddle partner on board is a great way to save space in your car and carry two kayaks on the same trip. The front paddler can brace himself for balance while the rear paddler climbs in. This technique works well, but it can be unwieldy, and the front paddler may have trouble anticipating when he needs counter-balance. If you don’t have a paddle partner, you can still brace yourself by hanging onto the bow and wrapping your feet around the deck.

Double kayaks are heavier and harder to recover than single kayaks, and are much more difficult to haul than single ones. You may be tempted to just climb back in, but that is not an ideal situation. Double kayaks are heavier, and it may take a long time to get back in, especially if you’re carrying camping gear and your gear. Fortunately, your partner can provide support and leverage during recovery.

Another option is to use a pickup truck. Truck beds are long enough to accommodate two kayaks, but the length of a pickup bed is only 8 feet long. A red flag on the kayak is a handy way to make sure it doesn’t overhang the truck bed. Using a paddle partner on a nitro allows two kayakers to be transported in one vehicle without a rack.

The next step in hauling two kayaks on a nitro is to tie down each kayak to the crossbars. To tie down the kayaks, simply place one end of the strap through the crossbar, then loop the other end under the other. Be sure that the straps are securely tied and do not twist the shape of the kayak. The straps should also be securely tied to the roof rack so that the kayaks do not shift or move while in transit.

Using a trucker’s hitch to get the lines nice and tight

A Truckers Hitch is a type of self-binding knot that’s most often used for securing loads to a fixed point such as a trailer or truck. This kind of knot is ideal for securing loads because it doesn’t jam or loosen even under extreme tension. It’s versatile and is a staple of any outdoorman’s toolbox.

There are many different variations of the Trucker’s Hitch. You can purchase 550-lb paracord from Amazon. To get a tight knot, start by connecting the working end of the cord to the item below. Next, pull the top part of the “S” tight while the other end doubles back and hangs above the entire thing.

Using a plastic version of the Anderson bailer

If you’re a newbie in the sport of boating, you may be wondering whether you should use an Anderson bailer. These are incredibly versatile and are the perfect choice if you don’t want to shell out a lot of money for a high-quality rig. But before you go out and buy one, consider this: using a plastic version of the bailer will save you from having to buy two separate kayak carriers.

The first thing you should know is that the Anderson bailer is not completely waterproof. It will allow a few drops of water to enter the footwell every minute, but this is significantly less than what you’d experience if water was spilling out of the footwell. In addition, an Anderson bailer will ensure that you’re not stranded in the middle of the water.

Using a stacker bar

A kayak rack that is made specifically to haul two kayaks on a roof rack is available from several companies. Thule, for instance, offers a rack that will fit their standard load bar. The SUP Carrier by Seattle Sports is another good option. Both will fit on most round crossbars. This kayak rack is a versatile addition to any vehicle and has a load capacity of 175 pounds.

A ratchet strap will tie both kayaks to the rack. If you purchase a ratchet strap, make sure you buy a pair with extra length. Using rope is another option, but you will need to be familiar with trucker’s hitches. Finally, if you plan on hauling two kayaks on a nitro, a friend or family member will be invaluable.

Once you have the rack set up, you can begin loading the kayaks. Using a J-style rack allows for easy side loading, while saddle-style carriers offer maximum security. However, if you plan to haul more than two kayaks, a stacker-style rack is your best option. After 15 minutes, check that the kayaks are strapped securely.

The next step is to install the cam straps. You can purchase pool noodles or foam blocks. Be sure to buy one that is slightly wider than your vehicle’s width. Be sure to measure both the length and width of the racks to avoid having to use extra blocks. A foam block should be long enough for both kayaks to fit side-by-side. After securing both kayaks with a cam strap, you can remove the kayak from the rack and haul them.

Read our next article Pescador Pilot Kayak. We would love your feedback about our Kayaks