How to Haul Two Kayaks on a Nitro

how to haul two kayaks on a nitro

One of the best ways to haul two kayaks on a Nitro is to use a stacker bar. Stacker bars are made specifically for carrying two kayaks and are lighter than the kayaks. They can be used with both kayaks and touring boats. These can be a great option if you don’t have the space in your truck bed to haul all of your gear.


There are two options for hauling two kayaks on a nitro. You can either put them on top of each other, or you can use a saddle that has rollers. Rollers are great for securing kayaks, but they can also make the kayaks slide around a bit. A felt lined saddle doesn’t have rollers, but it will allow the kayaks to slide easily.

First, you will need to purchase two full-sized pool noodles, at least 3 inches thick. You will also need to purchase two aluminum or stainless steel poles that will reinforce the pool noodles. You will also need four cam straps, which should be at least 20 feet long. Other optional items include a bungee cord, and enough rope to tie the kayaks to your vehicle’s bumpers.

Besides strapping the kayaks to your truck, you can also use a kayak rack. The advantage of using a rack is that you don’t have to drill holes in your truck. The rack can be attached with C clamps.

Self bailer

If you’re looking for an easy way to haul two kayaks on a Nitro, there are a few tricks you can try. First, make sure you have the proper space for your kayaks in your truck. Also, be sure to keep the kayaks separated as much as possible. You can even use bungee cords or straps to secure them in place.

While hauling the kayaks in your truck, make sure you secure them securely using tie down straps. Be careful not to over-tighten the straps as you don’t want to dent the kayaks. It’s also a good idea to put a red flag on your kayaks to alert other drivers.

If you can’t get your kayaks to sit upright, you can place pool noodles between the kayaks. Make sure they are a little shorter than the width of the vehicle. This will allow them to sit side-by-side.


Adding a couple of kayak straps can add another layer of security to your trailer. You’ll want to make sure the straps loop under the crossbar on the edge of the kayak so they don’t slide off. Adding a daisy chain to the straps is not expensive but will extend their lifespan considerably.

You can also use a telescoping lumber rack to carry two kayaks. These racks usually have a front and rear crossbar, and come with load stops. They also have a locking mechanism, which will prevent the kayaks from slipping off the rack.

You should first make sure that you have enough room in the bed of your truck to fit your two kayaks. You can secure them with C-clamps, but make sure to avoid over-tightening the straps to avoid damaging them. Using a red flag on your kayaks will also help other drivers see them and leave extra room.


A simple and low-tech way to haul two kayaks on a Nitro is to grab hold of the kayaks’ grab handles on each side. Then, stand on the left side of one kayak, grab the edge of the cockpit closest to your thighs, and pull up. From there, reach across the kayak with your right arm and place the kayak on your right shoulder. Then, set the kayak gently on the rack.

Another way to transport kayaks is to install a roof rack that is wide enough to hold the two kayaks on top. Most fishing kayaks are between 30 and 33 inches wide, so you’ll need a wide vehicle. Another solution is to attach a cradle, such as the Thule Hull-A-Port, to the roof rack. This cradle fits even the thickest kayaks, and can be placed at an angle.

The rack system you use should attach to the crossbars of your vehicle and cradle your kayak in a “J” or “V” shape. The kayak should also be securely attached to the rack by cam straps. The straps should be at least 12 feet long.

Rubber saddle

When hauling kayaks, it’s important to tie them down securely. There are various ways to do this, including using cam straps, ratchet straps, and bungees. You can also use a hitch for added stability. Regardless of how you choose to secure your kayaks, make sure you secure them correctly to prevent damage and loss.

When strapping the kayaks, make sure the straps loop under the cross bar on the edge of the kayak. This prevents the kayak from sliding through the straps. The straps should also be close to the kayak’s edge. If you have a small vehicle, you can use a cardboard to protect the surface.

After attaching the kayaks to the truck, you should place a red flag on them so other drivers will know they are there. This will help them see the kayaks on the back of the truck and leave more space between them.

Ratchet straps

There are a few options for hauling two kayaks on a nitro. You can use a daisy chain or bailer to secure the kayaks. The bailer should be made from dyneema so it won’t scratch the hull of your kayaks. The straps should stretch enough to accommodate two kayaks side by side.

Ratchet straps are the most common. Most people will need both types. A video is provided to demonstrate the proper way to secure a kayak. Be sure not to overtighten the straps, as they could dent the kayaks. Finally, you should place a red flag on the kayaks to make sure other drivers see them and leave more room.

One option for hauling two kayaks on a nitro is to use ratchet straps. These are usually 12 feet long. A ratcheting line makes the process easy.

Bungee cords

Many Nitro owners have trouble hauling two kayaks or canoes in the bed of their truck. This problem can be easily solved by using a kayak stacker bar, which is lightweight and easy to fit between two kayaks. Stacker bars also work well with touring boats and are a good solution for kayak owners who want to haul two kayaks.

First, lay out the two kayaks you plan to haul. Make sure the boats aren’t too tall or wide, and that the lengths are the same. You can also attach the kayak cam straps to the kayak poles to keep them in place. You can also use a foam block instead of pool noodles. You should make sure that the size of the foam block is smaller than the width of the vehicle.

Once you’ve set up the rig, it’s time to secure the kayaks. The end strap should loop under the cross bar at the stern. If your kayaks don’t have cam straps, you can secure them with a rope. Be sure to choose a rope that is both water resistant and non-stretchable. Then, check them to make sure that they’re balanced.

Red flags

To ensure safe transport of your kayaks, you must be aware of the regulations for hauling your kayaks. Some locations require you to have a red flag on the kayaks, but others allow you to use any brightly colored flag. If you are hauling two kayaks, you must check with your local regulations for these rules.

The first rule when hauling two kayaks on a truck is to secure the kayaks properly. They should be strapped onto the truck, but be sure to never over-tighten them. Over-tightened straps can cause damage to the kayak. It’s also a good idea to use a red flag to warn other drivers of the extended load. This will give them more room to avoid hitting your kayaks.

Another rule is that a red flag means a high risk of marine life and swimmers shouldn’t enter the water. A double red flag, on the other hand, means the water is closed to the public. This can be due to dangerous conditions in the sea or to protect marine life.