How to Haul Two Kayaks on a Nitro Rig

There are several different ways to haul two kayaks on a rig. A few of these include using a paddle partner to help you, ratchet straps, a soft rack system, or a bungee cord. But no matter which way you decide to go, you should be familiar with how to tie a trucker’s hitch. You should also know how to tie a trucker’s hitch if you don’t have any.

Using a paddle partner

Using a paddle partner to haul two tandem kayaks on nitro is a great way to share the load, but it also requires some maneuvering skills. Depending on the weight of each kayak, two paddlers can pump independently or work together, but both people need to maintain contact with their paddles for stability. Here are some tips for double kayakers. If the kayaks are full of camping gear, it can be tough to right them. If possible, the front paddler should push the double kayak over by climbing into the cockpit. The other paddler can use leverage to pull the kayak over to the right side. When in the stern, be sure not to hit the rudder.

The first step is to find a paddle partner. A paddle partner can be a friend, a family member, or even a professional. It is a great idea to use your paddle partner for a tandem kayak ride because you can both have an excellent view of the other person’s strokes. It is also a great way to increase your paddling ability. Practice paddle strokes with your paddle partner before you use it to haul two kayaks on nitro.

To make this even easier, you can use foam blocks. They are relatively cheap, but make sure the blocks are not too wide, as they can ding the door of the car. Make sure the foam blocks are long enough for the kayaks to be side-by-side. Then, tie them down. If you can, you’ll be able to pull two kayaks on nitro without too much trouble.

Using a saddle

When transporting a pair of kayaks, using a saddle carrier is a good choice. The horizontal position of the kayak is the aerodynamic and safest setup, and it takes up less roof space than other options. However, two kayaks on a small vehicle can be a challenge to load and unload, making a saddle carrier the best option for carrying two kayaks on a regular basis.

When transporting a pair of kayaks on a car roof, it’s important to tie the kayaks securely. You can do this using the same technique as when hauling single kayaks, but the placement of the kayaks must be perfect. This process isn’t as complicated as it may seem. Here’s how to do it safely. Depending on the size of the kayaks, you may need to use two straps instead of one.

Using a saddle to haul two kayak on nitro is more expensive than using a cradle, but it does make transporting the two kayaks much easier. You can even buy a rack for stand-up paddle boards! The racks are designed with wide bases, four sets of thumb screws, multiple high pressure points, and a foam block to keep the kayaks in place.

Using ratchet straps

There are several different methods for how to haul two kayaks on a nitrate truck. First, the kayaks should be secured with the use of ratchet straps. Stacker bars are ideal for whitewater kayaks and are used frequently. However, you can use them for touring or recreational kayaks. Once you have secured the kayaks, you can use a trucker’s hitch to secure them to the truck. Make sure to double check your straps and secure them before you start driving.

Next, strap the kayaks to the roof rack with tie-down straps. These straps should be positioned in the middle of the crossbars of the truck. You should also make sure the kayaks are secured in place so that they do not shift while driving. Once secured, you can tighten them and enjoy the drive! You may want to use two different sets of tie-down straps to secure both kayaks on the roof rack.

Another way to tie down the kayaks to the truck is to use a foam block. A good foam block will be a few inches wide and about twenty inches long. Then, you can use a few pieces of aluminum or stainless steel tubing and thread the ends through. Be sure to buy ones that are a few inches wider than your vehicle’s width. Lastly, place a red flag on your kayaks.

Using a soft rack system

Using a soft rack system to haul your kayaks is the best solution if you have only one vehicle. The racks attach to crossbars of the car and cradle the kayak in a V or J shape. They are secured with special ratcheting lines. Make sure you buy straps that are long enough for your kayaks and that are different lengths. It is also a good idea to use ropes because they are water resistant. Once installed, be sure to check the kayaks every 15 minutes to make sure they are securely attached.

The next step is to position your kayaks on the foam blocks. These can be more expensive than pool noodles but are worth every penny. You should choose blocks of the appropriate length, width, and height. Make sure the foam blocks do not overlap your vehicle’s width or any crossbars that it might have. After this, make sure your kayaks are positioned properly on the racks.

The straps are more convenient to use when you have two kayaks. The straps should wrap around the crossbars of the roof rack. Then, place the second kayak against the first kayak. You can also leave a small gap between the two kayaks if you have room. However, if you have limited space, adjust the other kayak accordingly. If you don’t have much room to move around, make sure to leave a couple of feet of space between the two kayaks.

Using a telescoping lumber rack

When it comes to hauling two kayaks on a nitro, there are a few things to consider. One option is a lumber rack, which creates a long span between the front and rear. It will also require a saddle system to attach to the rear bars. The advantage of a lumber rack over a truck rack is that it is permanent. It also does not need to be adjusted each time you want to haul your kayaks.

Another option is to use ratchet straps to secure the kayaks to the rack. Make sure the straps are long enough to tie the kayaks down. Also, use different sizes of ratchet straps. You can also use rope, but you may not be familiar with trucker’s hitches. No matter which option you choose, remember that your kayaks should be secured in the rear rack.

If you do not have the space for a bow and stern straps, you can mount the kayaks to the nitro with the help of an Outrigger II. This load assisting add-on mounts inside the crossbar and telescopes out between 18 and two feet. It will prevent the kayaks from rubbing against the vehicle. However, if you need to haul two kayaks on a nitro, you should buy a separate rack.

Using a nitro

Transporting two kayaks requires more care and attention than just putting one on a roof rack and slapping it onto the back of your car. In fact, if you plan on transporting two kayaks, you should treat the process as seriously as you would kayaking. A vast majority of kayak accidents occur while in transit. To avoid the hassle of traffic jams and clogged roads, consider using a homemade transport system. Utility trailers are often used as kayak transport. These trailers are basically just trucks with the bed lower to the ground. A utility trailer will work perfectly for this task and should be at least six or eight feet long.

NITRO comes with an online configuration system that allows you to configure your outboard, electronics, colors, and more. You can even configure the kayaks to go face down, or you can carry two kayaks face up and face down. You can also add a second kayak on top of your car. If you choose the latter option, ensure that you buy one that is longer than the other. The extra length will prevent you from accidentally hauling your kayaks.

Before loading the kayaks, you should adjust the tie-down straps so that they are properly attached to the roof rack. The straps should be snug, and they should not flop in the wind. You can also use ropes to tie down the kayaks, but you should know about trucker’s hitch. As a general rule, help loading the kayaks is always welcome. Whether you’re hauling two kayaks or just one, the process can be made easier if you have a friend who can assist you.

read more Fishing Kayaks blogs here.