How to Load 2 Kayaks on Roof Rack With 2 J Racks

how to load 2 kayaks on roof rack with 2 j racks

If you have two kayaks that are similar in size, you may be wondering how to load them on the roof rack of your car. The trick is to slide the stern of one kayak forward onto the front cradle, while the bow is slid back into the rear cradle. When loading the kayaks, try to place the weight evenly on the cradles. If they’re placed too far forward or too far back, it will be difficult to carry them. For added security, you can use cam straps to attach your kayak to the J rack, but make sure that you’re careful when tightening them.

Using crossbars

Loading two kayaks on a roof rack can be a challenge, especially if they are heavier than the vehicle. Depending on the weight of each kayak, there are different loading instructions. In general, the kayaks should be placed at least two to three feet forward of the vehicle’s stern. It is best to have a partner to help you load the kayaks.

The first step in loading two kayaks is to install a J rack. The J rack is a popular choice for transporting kayaks. The J-shape of the rack makes it easier to load. It provides secure housing for kayaks and is perfect for vehicles with crossbars.

The second step is to secure the kayaks. When you are not using the rack, you should tie down the kayaks with straps. J-cradle racks are available in a variety of sizes. For a single kayak, there are J-cradle racks, while for a pair of kayaks, a J-cradle rack has an adjustable securing mechanism.

When loading kayaks on a J rack, make sure to lock the J racks to the crossbars. This will add an extra layer of security, especially for tall vehicles. The locking J racks are a more expensive option, but they guarantee maximum security for your kayaks.

Using a J-cradle

To load two kayaks on your roof rack, you can use a J-cradle. These cradles have adjustable uprights that allow you to adjust the angle of each kayak. The 90-degree angle allows you to place two kayaks on the J-cradle, while the tilted back option allows you to put one kayak on each upright. You can secure your kayak on the J-cradle using cam straps, which are easy to use. Just be sure to tighten them securely.

If your roof rack has a ratchet, you can use it to secure the kayak. You should make sure the straps are long enough to fit under the rack and do not put any stress on the kayak. Once the straps are in place, you should tie them to the stern of the kayak. Alternatively, you can purchase a roof rack system with factory-installed metal bars. The most secure rack system will have metal bars that prevent your kayak from falling off.

You may need a partner for this step. The weight of the kayaks may vary, so it is best to have a friend who can help you. If you’re loading a heavier kayak, you might want to consider getting a J-cradle with a locking system, which will ensure your kayak is securely placed on the roof rack.

Using a j-rack

If you are a new kayak owner and would like to add kayaks to your roof rack, you can do so with a j-rack. These racks are easy to install and require no special tools. However, you will need to tighten the screws by hand depending on your vehicle and the setup of the rack. This is an important step because you don’t want your rack to rotate and compromise the security of your kayaks.

The J-rack can be used on various vehicles, such as small cars or bikes. A tall vehicle may be more difficult to use with a J rack because the kayak is raised high above the vehicle. However, smaller cars are easier to use. Some vehicles already come with roof racks installed, while others may require crossbars to mount the rack.

Before you load the kayaks onto the roof rack, you should first position yourself at either end of the kayak. Then, rotate it less than 90 degrees and position it on the J rack. To lift the kayak, the taller person should prop up one end of the kayak, while the shorter one should swing to the other end to lift it up.

Using a saddle

Using a saddle to load 2 kayak on roof rack with 2 j racks is easier than it sounds, but there are a few things you should know before installing one on your vehicle. First of all, you should be sure to use racks that are designed to hold two kayaks. This way, you can prevent your kayaks from sliding off the rack and will be able to get them on and off without difficulty.

J-style kayak racks are made to handle heavy fishing kayaks and canoes. They feature four sets of thumb screws, cross plates, and a wide base that will hold two kayaks securely. They also feature foam padding sheets to reduce damage to the kayaks.

If you’re planning to paddle a kayak by yourself, you may need to buy a lighter kayak. Also, you’ll want to buy a high-quality rack system. The Hullavator System by Thule is an example of a good rack system. This system is capable of lifting a kayak hydraulically onto the roof.

When choosing a roof rack for kayaks, you should check the vertical clearance and the weight limit of the kayaks. Some racks can only support a single kayak, while others require two or more people to lift heavy kayaks.

Precautions to take

If you plan to load two kayaks on your roof rack, there are some important safety precautions you should take. First, you should check the straps and buckles. They may need to be adjusted. Secondly, you should keep the kayak as close to one side as possible.

The weight of the kayak and the rack are about 40 pounds. Do not load more than this because overloading will damage the rack. You may want to use a pad underneath the kayak for better support. You should also take care not to twist the straps. This will also damage your kayak.

There are many types of roof racks. One option is a J-style rack, which will take up the least amount of roof space. Another choice is a universal rack. This type of roof rack is perfect for people who need a little extra padding and are limited by physical limitations.

When loading two kayaks on a roof rack, you need to make sure that the kayaks are securely fastened. Otherwise, you can cause damage to the rack or the kayak. So, make sure to check the straps and roof racks thoroughly before you drive.


If you are looking to load 2 kayaks on your car’s roof rack, it’s a good idea to get a J-Rack. These roof racks have adjustable padding to ensure your kayaks are protected. These racks can accommodate all sizes of kayaks and will fit on most crossbars.

Depending on the brand you purchase, the cost of loading two kayaks on your roof rack may vary. Some kayak racks cost less than $200, while others cost several hundred. There are two major companies that specialize in kayak roof racks. Malone Auto Racks, which operates from the coast of Maine, has over 10 years of industry experience and has led the way with innovations such as the patented “J” style kayak carrier. The company also produces economical load assist modules that allow a single person to load a kayak with minimal effort.

A roof rack that’s easy to load is the best option for kayakers who plan to travel cross country. The most expensive roof racks can be found for as much as $600. But there are also a number of budget-friendly options on the market that cost less than $100.

Cost of a Yakima JayLow

The Yakima JayLow is a traditional J-cradle kayak carrier that comes with two j racks and all of the necessary mounting hardware. Its simple design and ease of use make it perfect for carrying your kayaks. The Yakima JayLow includes straps to stabilize your kayak during transport and features a secure locking mechanism for added security.

The JayLow is incredibly easy to install. It uses two sets of couplers and clamps to secure the carrier to your roof. The couplers and clamps are very intuitive and easy to line up. The entire setup takes no more than 60 seconds and you won’t need any tools.

The Yakima JayLow kayak carrier is one of the most popular kayak carriers available. It is a well-known brand that offers full lifetime warranties on its products. It weighs about eleven pounds and features a wide cradle that can accommodate wide boats. It can also fold flat when not carrying cargo.

The Yakima Jaylow can hold one kayak in J-style position or two kayaks stacked vertically. It can accommodate up to 110 pounds. Besides being versatile and lightweight, the Yakima JayLow has a locking system to secure the racks to the crossbars of your car. It also comes with a cam lever for added security.