How to Load 2 Kayaks on Your SUV Yakima Rack

how to load 2 kayaks on suv yakima rack

There are various ways to load two kayaks on your SUV or truck. Some common ways include using J-racks, Stackers, Foam carriers, and Daisy chains. Then, you can use one or more of these options to secure your kayaks. Read on to learn how to safely load two kayaks onto your SUV or truck. Here are a few tips:


A Yakima kayak rack has two separate cradles for the two kayaks you want to load. Both have a lockable cradle and come with straps and tie-downs to secure the kayaks. The rack itself folds into a low profile and weighs less than 1.3 pounds per kayak. It will fit most crossbars, including Thule, Malone, and older square bars.

Roof racks are another option for transporting multiple kayaks. Stackers allow you to position two kayaks on top of each other, taking up half the space of a taller rack per kayak. They also offer maximum capacity, as they can stack against a post or another kayak for protection. Stackers are relatively inexpensive, secure, and easy to install. They will fit almost any type of kayak, although they won’t fit tandem sit-on-tops.

A kayak rack for your SUV may be the best way to transport your two boats. The Malone Downloader is a space-saving kayak rack that doesn’t add much roof space to your vehicle. This versatile rack is easy to install and requires no special tools. The Malone Downloader also features a built-in boarding ramp. The Malone Downloader is compatible with most manufacturers and crossbars, so it should fit your car perfectly.

When installing your new roof rack, you’ll want to attach ratchet or cam-style straps to each of the two kayaks. PVC glue is recommended at all connection points and should be allowed to harden before you put your kayaks on the rack. Make sure to check with your kayak manufacturer before you install any new accessories. You may need to adjust the positioning of your second kayak later, but that is entirely up to you.


If you want to load two kayaks on your Suv Yakima rack, you must first determine what kind of kayak you have. Most kayak racks are designed to hold a single kayak. It’s best to use two different types of kayak straps. You need two different straps, one for each kayak. You should loop the kayak straps over and under the rack. You need to be sure that the straps can be tightened easily. Lastly, be sure to give the kayak a test push to ensure that everything is secured.

A good quality roof rack is designed to carry up to 500 pounds. This is more than enough for two kayaks. However, some states have laws prohibiting driving a car with a kayak on it. The Yakima Overhaul HD roof rack accepts all of its accessories, including side bars. It is also easy to install and highly durable, so you’ll never have to worry about damage or rust.

When you’re ready to load two kayaks on your Yakima rack, you can use the J-Rack. This rack is designed for a wide variety of kayaks. Simply place the buckle at one end of the crossbar and loop the other end under the other. Make sure that the cam strap is tightly secured so that the kayaks do not move or get damaged. The J-Rack is also very versatile, and it will fit multiple kayaks.

Foam carriers

To load two kayaks on your Yakima rack, you need to know a few things. First, you need to get the proper foam blocks. The foam blocks should have a depression in the middle, which will allow you to set the kayaks on their side, rather than flat against each other. You also need to get a T-slot crossbar. This will allow you to place a kayak on its side and not tip the rack.

Next, you need to secure the kayaks securely. You can use ratchet straps. Be sure to get a couple of them of different lengths. Another option is to use rope, but you need to know how to tie a trucker’s hitch. If you don’t feel comfortable loading two kayaks on a rack, you can always ask someone else to help you.

Next, you should tighten the straps on the first kayak. You can then tighten the straps around the crossbars of the rack. After you tighten the straps, you can load the second kayak. Double-check the kayaks to make sure they fit tightly and securely. In case of a crowded rack, you can adjust the first kayak so it does not get in the way of the second kayak.

Daisy chain

To load two kayaks on your suv yakima rack, the best way to secure them is with a daisy chain. This will minimize the amount of excess strap and make it easier to tuck them away when not in use. A daisy chain will also increase the life of your kayak straps, as they’re not the most expensive parts of the rack.

The double kayak rack is easy to install and features a daisy chain system for securing two kayaks. The rack is equipped with 4 universal mounting inserts that will fit over most crossbars and prevent them from sliding. You can also use the rack for bicycles with the included wraps. Despite its compact design, this rack is very sturdy, and the extra tie-down straps will strengthen the mounting.

The length of the daisy chain is determined by the width of your car. In order to safely load two kayaks on your car, you’ll need a couple of inches of extra length. The length of the straps will vary from vehicle to vehicle, but it’s usually enough to secure two kayaks on an SUV yakima rack. You can also make a daisy chain out of the excess straps.

The first kayak should be loaded farthest on the suv yakima rack. The second should be placed close to it. If you can fit the two kayaks side by side on the rack, the straps should secure the kayaks in place. The second kayak should be secured using the second set of straps. Make sure to tighten the straps on both kayaks.

Tightening straps

Once you have assembled your SUV yakima rack, you can begin to load your kayaks. There are several important tips to keep in mind while loading your kayaks on the rack. Tightening the straps is crucial for securing your kayaks. Be sure to keep the straps taut by looping them under the cross bar and the side rails of the rack.

First, attach the bow line to the front of each kayak. Secure the line somewhere in front of the vehicle. Many vehicles are fitted with a factory installed latch or hook for this purpose. Attach the hood loop strap under the hood using the existing bolt. Loop the anchor straps inside the rear door and hood. This will prevent the kayaks from swinging back and forth when loading them.

Ensure that the crossbars are flat and thin. The crossbars are made of plastic composite and are usually flat. While some SUV racks are better than others for carrying kayaks, you should check the load rating first. In case of any doubts, contact the service department of your car’s manufacturer or read the owner’s manual. You can also do a little research online.

Make sure that the straps are snug. Once the kayaks are properly secured, you can secure them to the rack. It’s also important to check the straps for tension. If you find the kayaks loose, adjust them until they are secured. Also, make sure that the kayaks are tied down properly, otherwise they could shift or fall off while driving.

Parking options

There are a few different ways to park your kayak on an SUV yakima rack. If you’re going to use the roof rack, make sure you consider the height and length of the kayak. A kayak will protrude beyond the height and length of your car, so you’ll want to make sure that you’re prepared to deal with that. Here are a few ideas:

Garage. If you have a small car or bike, a garage is probably the best option. A bigger vehicle should be parked in the driveway. Apartment dwellers may find garage parking more convenient, though. The J-Rack is an easy-to-use, secure way to load and unload your kayak, though there are some safety concerns you should keep in mind. If you’re using the rack in an apartment building, make sure to follow the instructions carefully to ensure that you don’t hurt yourself loading and unloading the kayak.

Whether you want to place your kayak upside down on the rack or mount it on an aftermarket kayak rack, you need a secure way to place your kayak. If your crossbars are flat, you’ll need a rack pad to keep it in place. A rack pad will protect the kayak and make it easier to grip. Regular Rack Pads and SUV Rack Pads are available to fit flat factory and aftermarket crossbars.

Read our next article We would love your feedback about our Kayaks