How to Lock Kayaks in Back of Truck

how to lock kayaks in back of truck

A truck bed mat is a must-have if you’re transporting kayaks. However, if your truck isn’t equipped with a bed mat, you’ll need to make one yourself. To prevent it from sliding off, attach a flag to the kayak. For extra cushion, consider using foam blocks and non-slip bottoms. If your truck bed mat is slippery, you should place a pad underneath it.


Using tie-downs to lock kayaks in the back of a truck is a very good idea, but there are some other things you should know. First of all, kayaks can become a lethal projectile if not secured properly. Truck bedmats will protect cargo, but a kayak can still fall out. Invest in foam blocks that will protect the hull and make the kayak secure.

When loading your kayak, ensure that its bow is against the back of your truck and that at least 70 percent of its length fits inside the truck bed. Don’t overhang it as this can damage the hull or cause it to fly out. You may want to invest in a bed extender if your kayak is long enough. If you have an extra long kayak, be sure to secure it with a rack system.

Once you have secured your kayak, it is time to place it in the truck bed. If it’s the first time you’ve transported a kayak, it’s a good idea to use tie-downs to secure it. If you don’t have any, you can always attach cable locks to the kayak to keep it secure. Tie-downs can be used for kayaks that have been dropped or stolen.

If you plan to travel long distances with your kayak, use a flag to alert other drivers of its presence. You can use a bright handkerchief or a shop towel as a flag. Be sure to secure the flag tightly to avoid it coming loose while you’re driving. Another option is a clip-on golf towel. It’s very easy to secure and can be done quickly.

Ladder racks

There are several reasons to use ladder racks for kayaks in the back of your truck. They are highly customizable and offer an amazing load capacity. The X39 kayak rack, for example, has railings installed on the bed of your truck and an over cab extension that extends from 45 inches to 53.5 inches. It also has built-in front rope hooks that tie the kayaks to the rack. You can also add kayak padding to protect the watercraft during transport.

A kayak rack is the best option for truck owners with long hulls. It can hold multiple kayaks, and doesn’t close off the bed of your truck. The kayaks will be elevated out of the way of your truck bed, and you can still haul your camping gear and other equipment in the back. Ladder racks for kayaks in back of truck: Installing one of these racks will keep your kayak secure, but you might not want to take the risk of it falling off.

Adjustable truck bed ladder racks are also a great option for hauling longer items. These racks are adjustable to fit different truck bed sizes and will allow you to store anything from ladders to pipes and even surfboards. The adjustable ladder racks are also very easy to install and cater to a variety of truck bed sizes. By extending the bed length, you can store your kayak in the bed and other equipment in the back.

Universal and adjustable truck ladder racks are the best option for hauling kayaks. These racks have five-foot height and can support up to 800 pounds. Another option is the goal post truck rack. This rack is made of two heavy-duty steel bars. This rack is adjustable from five to seven feet and comes with all the accessories needed to secure the kayaks. The TMS adjustable utility rack is a universal design, with two heavy-duty steel bars for easy setup.


When you’re driving across the country with your kayaks, you’re probably wondering how to lock them in the back of a truck. Fortunately, this can be done in a couple of ways. The first method is to wrap a cable around the anchor point, and use a cable lock to secure the kayaks together. If you have multiple kayaks, you can also loop a cable lock around each one and secure the entire bundle.

Another way to secure your kayak is to put it inside a locked shed or garage. Lock it up in a safe spot that’s out of sight of thieves. Another option is to tie it up with a rope and hang it against a sturdy tree. If this isn’t possible, use a kayak rack mounted on an exterior wall. This will keep it off the ground, which is a potential target for thieves.

You can use a ten-millimeter marine-grade cable with a cable lock. These cable locks feature a vinyl coating to protect the cable from rust and corroding. The locking end of the cable fits through the scupper holes of sit-on-top kayaks. It’s also adjustable to fit kayaks up to six feet in length. This cable lock is made to withstand extreme temperatures.

Another option is using locking straps. These straps are fully maneuverable, and have a steel cable threaded through them. It is strong enough to prevent theft from any angle, and they also have locking mechanisms on their buckles. These straps can be used to secure multiple kayaks, which is a great option when the road trip is long and you’re traveling with multiple kayaks.

Cam buckles

If you plan to transport your kayak in the back of your truck, you need to secure it with cam buckles. If your kayak has no cam straps, use rope or a load rated carabiner to secure it. If you don’t have cam straps, use a rope, but make sure it is non-stretch and water-resistant. Tie the straps below the cam buckles to prevent them from flapping around while driving. To secure the kayak in the back of the truck, shake it up to check that it is securely secured. You can also hook the handle to your kayak to secure the kayak.

A locking cable run can help you secure your yak in the back of your truck. It runs through the seat, grab handles, and tow loop. If your kayak is smaller than 11 feet in length, you can use a locking cable to secure it in the truck’s bed. Make sure to place a red flag on the bow and end of the yak so that other road users know what you’re transporting.

To secure the kayak in the back of your truck, first open the rear door. Make sure there are no loose items or other obstructions in the way. After that, use cam buckles to attach loose items to the kayak and tie them to the truck. The elastic tangle should be removed before you store your kayak in the back of your truck. Once everything is locked, you’re ready to move on to the next adventure.

When it comes to the securement of your kayak, you can choose between ratchet straps and cam buckles. Ratchet straps are the most secure, but can cause damage to your kayak if not tight enough. Ratchet straps are also more prone to stretching and cracking the kayak hull. In either case, you need to consider a few things before making a decision.

Retractable tie-down anchors

Retractable tie-down anchors for your kayak in the back of your truck are an excellent way to secure the kayak while traveling. To use them, simply place the kayak in the truck bed with the bow part against the cab and stern against the tailgate. Then, use a truck bed extender to extend the bed’s length. A truck bed extender should be long enough to support half of the kayak and the truck tailgate.

Retractable tie-down anchors for your kayak are especially useful when traveling long distances. The kayak should be placed at a slight angle in the truck bed. This way, it won’t stick out as much and will be supported better. Also, it should not be placed over 70% of the truck bed, or else it will be difficult to tie down the kayak properly. Use ropes of varying thickness and high quality to secure the kayak in the truck bed.

Another great feature of a kayak carrier is that it only weighs 10 pounds and can hold up to 300 pounds. These tie-downs are compatible with most trucks, except for the Dodge Ram Box, the Chevrolet Avalanche, and the Cadillac Escalade. Transporting kayaks in the back of a truck is the most convenient method of transport. Once the kayak is secured, you won’t need to lift it up. Also, you won’t have to worry about wind blowing the kayak as it’s stowed inside the truck bed.

A kayak can also be secured with a stacker bar. A stacker bar allows multiple kayaks to be secured by stacking them on top of one another. Stacker bars are often used for lighter whitewater kayaks, but they are suitable for recreational and touring boats as well. To secure a kayak in the back of a truck bed, the kayak must be centered between the two crossbars. Position the cam strap over one of the crossbars.

Please read our Blog here Fish Finder Hook 2 for more fish finder information.