How to Mount Kayaks on an RV

If you’ve ever wondered how to mount kayaks on an RV, then this article is for you. I’ll go over why and how to mount your kayaks with Yakups, a ceiling hoist, and PVC piping. Hopefully, this information will help you make the best decision for you and your kayaks. You’ll be glad you read it! And don’t forget to check out my video, “How to Mount Kayaks on an RV” if you’re still unsure.

Yakups RV Kayak Rack

You can buy a ready-made rack to mount kayaks on your RV. But it’s not necessary; you can also have a custom rack made to fit the size and weight of your kayak. But if you’re traveling with a bigger RV, it might be difficult to install a kayak rack on the roof. Besides, carrying a kayak on the roof is a much cheaper alternative. You can also use pool noodles to secure the kayak to the rack, which will protect the RV as well.

This rack is compatible with most RVs. It has a 108-pound weight capacity and can also be used to mount a bike. However, if you own a van-style RV, you might want to go for a rack that weighs a few hundred pounds less. The rack is 56″ wide and sticks out only 3 feet from the roof. It fits most standard hitch receiver swing-arms.

A good RV kayak rack is made from durable materials. Yakups makes kayak racks with double-coated steel frames for strength. The rack is also rust-proof, thanks to its powder coating. It’s also compatible with standup paddleboards. These racks are custom-made and manufactured in the USA. When you’re ready to mount your kayaks on your RV, don’t hesitate to contact Yakups.


When travelling in an RV, you may wonder how to mount kayaks safely on the roof. It’s important to note that the roof mounts need to be secured so they don’t interfere with the clearance limits of the vehicle. The roof mounts may also be dangerous to use if you’re driving under overpasses. If you’re not sure how to mount kayaks on the roof, read this RV eBook to learn the best way to secure them securely.

To mount kayaks safely on an RV roof, first measure the length of the kayak against the roof. If the kayak’s length is longer than the RV roof, you can use a kayak rack made of pool noodles. Place the kayak on the rack, fastening the ratchet straps on each side. If possible, use more pool noodles than the roof of the RV because this will prevent the kayak from sliding off due to wind and speed. After installing the rack, double-check the ratchet straps to make sure the kayak is securely in place.

While the roof mount is the most popular and convenient option, it can be tricky to access the kayaks while driving. A roof mount is ideal for storing kayaks, but it can also be hazardous because it reduces the clearance of the vehicle. If you choose to mount kayaks vertically, you should look for a sturdy rack made of metal. Fold-down cargo trays are another smart option. Hitch-mounted cargo trays are typically used for coolers and bikes, but you can modify them to fit a kayak.

Ceiling hoist

If you are in need of a ceiling kayak hoist, you can use one for home or on an RV. A ceiling kayak hoist is designed to lift multiple items up to 90 pounds. Its durable straps and hooks lock in place and prevent the kayak from falling while in use. It can also be used for storage purposes inside a garage. However, you must consider the structural integrity of the ceiling before installing the hoist. Otherwise, you risk causing an accident.

Unlike other roof racks, ceiling kayak hoists can be installed in any indoor garage ceiling and can work with a car’s roof rack. If you want to store your kayaks on your RV, you can use a ceiling kayak hoist. This allows for direct transfer from your car’s roof to storage. But it does come with some disadvantages. First, the ceiling kayak hoist requires some installation.

Secondly, ceiling kayak hoists can be expensive and difficult to install. Regardless of your budget, it’s essential that the ceiling kayak hoist is properly mounted and constructed. Otherwise, it can cause serious roof leaks and cost you money in the long run. Another option is to use an inside kayak rack for your RV. If you don’t want to install a ceiling kayak hoist on your RV, you can always hang your kayak from a raft or another structure.

PVC piping

Before mounting kayaks on an RV, you need to install a bike rack stanchions. In order to do this, you need to drill five holes that are approximately 1/4″ diameter. You should also install two sets of 1/4″ diameter holes to secure the bike rack fixtures. Next, you need to attach a 6-inch length of 3/4″ PVC pipe to the stanchions. You can add pipe insulation to both ends. Once you’ve glued the PVC tubing to the vehicle, you should attach two sets of PVC fittings to the top and bottom of the RV. If you want to remove one end of the PVC pipe, you can cut it off.

For the paddles, you can use PVC piping as the mounting materials. PVC is cheap and easy to cut. The material can also be shaped with fittings. This makes it easy to piece the kayaks together. It is important to note that the PVC piping is usually white in color. It is important to use a paint that will protect it from scratches. Using a double-ended pipe will also ensure that the kayak will stay secure on the RV.

To mount the kayaks on the RV, first determine the length of the roof. It should be long enough to accommodate the kayak. Then, make a hole for the cargo rack. This will secure the kayak to the rack. If the kayak rack doesn’t have a roof, the roof should be cut in line with the ladder. Once installed, the kayak should stay securely in place on the roof, with a single ratchet strap in the top.

Adapter for hitch mount

An adapter for hitch mount for kayaks on your RV can be a great way to haul your boat along for your next camping trip. Whether you’re tying up your RV to the trailer of your RV, or just want to travel in style, an adapter can make your life easier. Not only can you secure your kayaks on the trailer, but it also gives you extra space inside the vehicle and can accommodate your car or bike.

A simple solution to mounting your kayak on a hitch is the Yakima Backswing. This rack can support up to 250 pounds and swing out 90 degrees when not in use. A side benefit of this rack is that it can swing away from the vehicle, allowing you to access the back door or storage hatch. Generally, this hitch mount for kayaks can be used on RVs with a 2-inch hitch receiver.

Unlike a hitch mount for kayaks, the deluxe version of this adapter pack is a portable hitch for kayaks and canoes. It measures 51-1/2″ wide by 17-1/2″ deep. When you’re not using the kayak, the basket folds flat for easy storage. For added convenience, the hitch mount comes with pool noodle sections to keep your kayak in place while you’re driving.

Bungie cord

If you want to travel with your kayak and an RV, there are several options. You can purchase kayak racks that are specifically designed to hold kayaks, but they’re not cheap. There are also a variety of options for mounting your kayaks, including bungee cords and tarps. You can also attach your kayak to your RV’s roof ladder, but be sure to do so with care, since you don’t want to damage it.

One way to mount kayaks on an RV is to use pool noodles. You can use as many as you need to secure your kayak to your RV. To ensure your kayak is securely mounted, you’ll want to use ratchet straps on both the bow and stern. Then, place your kayak on the pool noodles, and use the other person to tighten or loosen the pool noodles.

Read our next article Fishing Kayaks for Sale. We would love your feedback about our Kayaks