How to Strap to Kayaks Down to a Soft Roof Rack
If you’re wondering how to strap to kayaks down to t a soft roof rack, you’re not alone. Most people don’t know how to do this. The kayak straps can come untied, especially during cooler traveling temperatures. Here are a few tips to secure your kayak safely on your roof rack. Read on to learn how to secure your kayak to your car. best inflatable fishing kayaks
The most common type of roof rack for kayaks is composed of two foam tubes with a single strap running through the middle of each tube. First, open the doors and adjust one tube toward the rear window, while the other tube should face the windshield. Then, place your kayak upside down on the rack. After that, install the rack permanently. This way, you won’t have to worry about the kayak tipping over during the ride.
Before you strap your kayak to the roof rack, make sure that it is completely dry. This may seem weird, but it will prevent the straps from deteriorating over time. Kayaks can get wet when strapped, so avoid leaving them out in the sun. And remember, the straps should be secure if they can withstand the weight of the kayak. If they don’t, you’ll have to replace them sooner rather than later.
Once you have your kayak on the rack, make sure it is secure by tightening the straps and adjusting them to fit tightly. Once secured, use the second set of straps to secure the kayaks. Once you’ve done this, it’s time to check the placement of your kayaks to make sure they’re securely secured. If they’re not, you can adjust the kayak’s position until you find it right.
Before you start strapping your kayaks down to your soft roof rack, consider if you’d like to use upright bars. This makes strapping the kayak easier because it keeps it upright, avoiding the risk of damage to the bottom of your kayak. If you’re not sure where to place the kayak, use your side handles as a reference. And don’t forget to attach your kayaks securely to the crossbars.
If you’re taking your kayak on a long trip, you might want to place it as far off the side of the crossbar as possible. Using two kayaks at the same time makes this much easier. The front crossbar straps should be against the center of the windshield, while the rear crossbar strap should be against the middle of the rear window. Make sure the kayak is positioned hull-up for ease of loading and unloading.
Once you’ve secured the soft rack and kayak, make sure to tie down the foam blocks to the kayak securely. Ideally, you’ll want to use specialized straps for this. The straps should be long enough to go around the kayak and under the block. Make sure the straps fit snugly so that they don’t squeeze the kayak or cut into the foam blocks. If you’re not sure how to secure your kayak, consult a professional.