how to use new fish finders

How to Use New Fish Finders

If you are considering buying a fish finder, it is imperative that you understand how to use it properly. While some finders are ready to use out of the box, others require some setup. You must install the transducer, display unit, and power cable before you can begin using the device. You will also want to know how to adjust the settings so you get the best performance out of your new fish finder. For instance, if you are looking for a more detailed picture of a school of fish, you will want to select the Wide Spectrum mode. fish finders bass pro

In addition to learning how to use the plotter and finder together, you should also learn how to use the fish finder’s bottom-scanning capabilities. This feature is important for learning where to fish, and it can also tell you what type of bottom you are fishing on. Hard or soft bottoms will give you different bottom-scanning signals. To find soft bottoms, you can increase the sensitivity of your fish finder.

If you are new to using a fish finder, it is best to leave the settings on auto-scanning. This will give you a baseline performance and allow you to see whether the settings you have selected make a difference in the clarity of your image. If you need more detailed images, you can adjust the sensitivity, but make sure that you are not adjusting the sensitivity too high.

Before installing your new fishfinder, make sure to choose a location that has the right depth for it. Your fishfinder will not perform well if it is not properly installed. Also, make sure that you have no obstructions around the device. You should be able to place it at the deepest part of the hull.

It is also important to know how to read your fish finder screen. Despite how advanced these devices are, many people don’t fully understand how to use them. Even if you have purchased the most expensive model, you may not be able to get the best results from it if you do not understand the basic operation.

The newest generation of fish finders uses a directional transducer that captures 360-degree images around your boat. It also uses sonar signals to differentiate between fish and bait. It can also distinguish between hard bottom and soft bottom. Using a fish finder will help you get better results with less effort.

Despite the incredible advances in modern technology, it is important to understand how to use your new fish finder properly. Some models feature automatic tuning capabilities. However, you should still tune down your fish finder if your water is turbid, contains thick planktonic growth or algae. This can fool your fish finder. So, lower its sensitivity until the clutter has been removed.