Lowrance Fish Finder With Transducer Position
Getting good fish finder images requires the proper transducer position and height. Installing it incorrectly will degrade the performance of your boat. You may need to change the transducer position, or even remove it, in order to see better images. The best location is to install it on a poly mounting board. side view fish finders
Generally, the leading edge of the transducer should be angled up slightly. The transducer should not be placed at an angle too steep, since this will lead to turbulence and poor performance. However, if you use the transducer on a deadrise hull, it’s essential to position it at the proper angle.
Lowrance offers a variety of transducers for all types of water and conditions. These include transducers for lakes, inland waters, and coastal areas. The Low Chirp and SideScan transducers are especially useful for fishing large areas. These transducers can show structures up to 600 feet away. They also allow you to view shallow-water areas you would otherwise not be able to see from your boat.
Lowrance has lake maps for most of the lakes in the U.S. This is great for kayak anglers. They also have transducers for small boats and kayaks. A Lowrance Fish Finder with transducer position can also be a great choice if you are unsure of the position of your transducer.
The first step is to mount your transducer. This process will take approximately an hour or two. Make sure you install the transducer properly in order to get the most out of your sonar unit. Typically, the transducer comes with mounting hardware. You can watch a video to learn more about the process.
Secondly, you should make sure the transducer is located near the keel of the boat. Many people mount their transducers too far away from the keel. This is not an ideal location for high speed sonar. In addition, small boats run on a thin piece of hull when they are on plane, meaning that transducers that are too far away will have poor sonar readings at high speeds. Once you’ve located the best location, you can test it several times to make sure it’s correct.
You should also consider the type of transducer that you have. While transducers with a transom mount are commonly used in small boats, it is not a good choice for larger boats because there’s a risk of water interference from the propeller. A side mount is a good option if you don’t want to drill holes in your transom or use a transom mount.
Lowrance has several mount options for their fish finders. One popular location for transducers is the jackplate. A hole can be drilled underneath the jackplate. Another location for the transducer is under the hull. It’s important to note that the transducer should never be too high as it may cause sonar echo interference.