Where to Place Batteries on a Ascent Kayaks

where to place batteries on a ascend kayaks

If you’ve decided to purchase an Ascent kayak, you’ll want to know where to place your batteries. There are several options available, including storage hatches, tankwells, and Lithium-ion or SLA batteries. Lithium-ion batteries have several advantages over traditional batteries, including a shorter life span and a smaller footprint. These batteries also require a different charger, which is safer and easier to use.

Storage hatches

A storage hatch on an ascend kayak allows you to carry tackle, extra clothing, or lunch. They are available in a wide variety of sizes and are designed to prevent water from entering. Most of these hatches are equipped with a foam gasket. They are easy to remove and replace.

A storage hatch on an Ascend kayak is an essential piece of equipment. It keeps your valuables dry and safe. For example, if you leave your cell phone in a waterproof case or sealable bag, it may not function properly if you need it to reach shore in an emergency. The material that is used in kayak manufacturing is high-density polyethylene, which is also commonly used to make durable plastic goods.

The Ascend kayak has six storage hatches total, four in the cockpit and two at the rear tankwell. The rear hatch is large and has a water-resistant gasket. The third hatch is smaller and located at the stern of the kayak. A water-tight deck plate is used to secure the hatch.

Quality storage hatches include rubber or neoprene washers to prevent water from seeping through. They can be installed over the existing ones to add additional protection. While choosing the hatch cover for your ascend kayak, always be sure to consult the manufacturer and ask for recommendations.

The Ascend kayak has ample storage and an adjustable high-back seating system. Its advanced tunnel hull improves stability throughout the entire boat and provides improved standing capability. The Ascend FS128T Sit-On-Top is ideal for angling and is built to handle open water and slow water.

The Ascend 128t comes equipped with a Yak-Power system, wiring harness, and plugs. The battery power system will provide the Ascend with ample power. A 12-volt battery is required for the system to operate. It is eight inches longer than the 12t and 33 inches wider. The newer model has a larger standing platform, and is 96 pounds heavier than its predecessor.

A large recessed tankwell on the Ascend 12t kayak is perfect for carrying a small battery or a small cooler. The tankwell is also equipped with scupper holes, which allow for drainage of water from the storage space. Both sections of the tankwell also feature similar bungees to prevent water from entering the storage area.


There are two tankwells on the Ascend 12t and Ascend 16t kayaks. The forward tankwell is a closed compartment with a bungee system built in. Unfortunately, the bungee is only attached to the tankwell floor, not the deck. Because of this, you can only secure items that are close to the floor. In some cases, this may be a thoughtful addition. However, it’s not ideal for securing small items that should be placed near the floor.

The rear tankwell on the Ascend 12t kayak is recessed and divided into two sections. The rectangular section is closest to the seat and has room for a small cooler and a battery. There are also scupper holes that drain the water out of the storage area. The triangular section has similar bungees running along the floor.

Ascend kayaks are available with an optional Yak-Power system, which allows you to plug your own 12-volt battery into it and run a motor. This system is compatible with a wide variety of 12-volt batteries. These systems are designed to be easily installed and can be used in a variety of conditions.

Lithium-ion batteries

If you want to add a lithium-ion battery to your kayak, you’ll need to make sure that you use a waterproof compartment to store it. A waterproof storage container that is approximately two litres in volume is perfect for this purpose. It can accommodate the lithium battery and its wiring without causing any damage to your kayak.

The batteries are made of lithium, which is a critical mineral. The battery has two positive and negative terminals. If the positive terminal is wet, it will be prone to short circuiting, which will result in overcharging and a dead battery.

The battery terminals should be covered with non-conductive tape. It is best to store lithium-ion batteries separately from regular batteries. Never put them in your household trash or recycling bin, as they can cause fires and injury. It is best to recycle them at an electronics recycling facility.

There are several different battery models to choose from. For instance, the Ampere Time model is powerful enough to power an entire kayak, weighs fifteen pounds, and has a 50-AH capacity. This battery is also resistant to vibrations and maintains its same voltage during charging. On the other hand, the Mighty Max battery is compact and weighs less than forty pounds.

One disadvantage of using lithium-ion batteries is the fact that the batteries are expensive. It costs around PS190 to build a lithium-ion battery box, while a lead-acid battery box costs about PS40. This is a small price to pay for the added power and safety. However, these batteries can save you a lot of trouble in kayaking.

Another advantage of lithium-ion batteries is that they are more efficient. You can expect a battery to last up to an hour on low and two hours on high. However, the life of your battery depends on how much you use it. A battery with a higher Amp-hour rating will last about two hours on low and five hours on high.

Lithium-ion batteries are also safer, lighter, and require less maintenance than lead-acid deep cycle batteries. However, lithium batteries are more expensive than lead-acid deep cycle batteries.

SLA batteries

If you are in the market for a new kayak battery, you might be wondering if it’s possible to use SLA batteries on your kayak. SLA batteries are a great choice because they are heavy and large, and they don’t require maintenance. They also have the advantage of being leakproof. The downside to using SLA batteries on your kayak is that they can run down quickly. If you plan to paddle for a long time, SLA batteries may not be the best choice.

A lithium-ion battery will provide enough power for an entire day’s worth of activities. This battery is spill-proof and can be mounted in any position. However, it is best to mount it upright. It will handle all types of weather and provide plenty of power. Its 35Ah rating won’t provide enough power for a full day of trolling motor use, but it should last a day’s worth of activity.

Conventional batteries can add extra weight to your kayak. To avoid this, consider utilizing external power packs, which are the same size as three or four smartphones stacked on top of one another. They are lightweight and easy to carry and won’t add much bulk to your kayak. And if you’re going to be using your kayak for a long time, opt for a battery with a higher amp-hour rating.

Another option is to use the Optima Blue Top Marine Battery, which is the latest deep-cycle AGM battery. Though it’s expensive, it has a large capacity. It is also very durable and doesn’t need much maintenance. Despite the price, this is a great option for serious kayakers.

There are many benefits to using a lithium-ion battery on a kayak. It will give you the thrust you need and keep your kayak running smoothly. Another advantage is that the battery is small and light, so you can install it anywhere on the kayak. You’ll need two batteries, as well as a jumper cable to connect the positive and negative terminals of the battery.

Choosing a good battery for your kayak is critical if you want to get the most enjoyment from it. The best battery is one that meets your needs and fits your budget. It should provide you with years of enjoyment while on the water.