How to Install a Bow Mounted Fish Finder

Choosing the best location for your fish finder is crucial. If you plan on using it on a fishing boat, it should be close to where you will be paddling or driving. Depending on the type of boat, you may want your fish finder mounted near the steering wheel or near the trolling motor controls. Likewise, if you are using a center console with an outboard motor, you may want your fish finder mounted near the outboard’s throttle. fishing Kayaks for sale

If you’re using your bow mounted fish finder on a small boat, you may want to consider a model that can network with your console. You can do this by running an ethernet cable from your console to the bow and power from there. The downside of RAM mounts is that they tend to fail when placed in heavy conditions and the cable connections are prone to corrosion. In most cases, a bow mounted fish finder is more than enough.

Another popular option is a pedestal mount. This type of mount can be one to four feet tall and extends up from the boat’s deck. These models are often popular for intense watching and active imaging technology. The mount is usually durable, but it is still advisable to remove it when transporting the boat. It will prevent water from getting into the transducer. A pedestal mount is ideal for smaller boats, but is not a good option if you plan to fish in rough water.

If you’re looking for a more versatile and professional looking fish finder, then a RAM mount may be a good choice. RAM mounts are easy to install, and they look neat and clean. However, if you’re concerned about getting smudged by other objects, then a pedestal mount is the best choice. If you’re unsure of the proper installation, you should look for a guide that will walk you through the process step by step.

When you’re finished with installing the transducer, you’ll need a spirit level or coins to level the unit. Once you’ve done this, launch the boat and test the device. If you notice an arc in one direction but a slanted arc in the other, this means that your transducer is not leveled properly. The same applies to side imaging. If the arc is angled to one side but not the other, it’s time to move on to the next step.

A bow mounted fish finder is a great tool to use while fishing. These units give you coverage on all sides of the boat. You can also use them in conjunction with a rear unit to cover the entire water column. When you have a GPS anchor, a bow mounted fish finder can give you a much wider field of view than a front-mounted fish finder. And the rear unit will pick up fish from behind your boat!

The screws for the transducer should be tightened. Don’t over-tighten the screws. Make sure the cables are attached properly to the unit and are securely fastened. Lastly, don’t forget to use gloves to protect your hands from getting cut by the fiberglass. In short, make sure your bow mounted fish finder is secure and is ready to go! With these easy instructions, you’ll soon be enjoying the benefits of a high-quality transducer.